Gibbs free energy

2008/9 Schools Wikipedia Selection. Related subjects: Chemistry

Statistical mechanics

$S = k_B \, \ln\Omega$

Statistical thermodynamics
Kinetic theory

Particle Statistics
Maxwell-Boltzmann Bose-Einstein · Fermi-Dirac Parastatistics · Anyonic statistics Braid statistics

Ensembles
Microcanonical · Canonical Grand canonical Isothermal–isobaric Isoenthalpic–isobaric

Thermodynamics
Gas laws · Carnot cycle · Dulong-Petit

Models
Debye · Einstein · Ising

Potentials
Internal energy · Enthalpy Helmholtz free energy Gibbs free energy

Scientists
Maxwell · Gibbs · Boltzmann

In thermodynamics, the Gibbs free energy ( IUPAC recommended name: Gibbs energy or Gibbs function) is a thermodynamic potential which measures the "useful" or process-initiating work obtainable from an isothermal, isobaric thermodynamic system. Technically, the Gibbs free energy is the maximum amount of non-expansion work which can be extracted from a closed system or this maximum can be attained only in a completely reversible process. When a system changes from a well-defined initial state to a well-defined final state, the Gibbs free energy ΔG equals the work exchanged by the system with its surroundings, less the work of the pressure forces, during a reversible transformation of the system from the same initial state to the same final state.

Gibbs energy is also the chemical potential that is minimized when a system reaches equilibrium at constant pressure and temperature. As such, it is a convenient criterion of spontaneity for processes with constant pressure and temperature.

The Gibbs free energy, originally called available energy, was developed in the 1870s by the American mathematical physicist Willard Gibbs. In 1873, in a footnote, Gibbs defined what he called the “available energy” of a body as such:

“

The greatest amount of mechanical work which can be obtained from a given quantity of a certain substance in a given initial state, without increasing its total volume or allowing heat to pass to or from external bodies, except such as at the close of the processes are left in their initial condition.

”

The initial state of the body, according to Gibbs, is supposed to be such that "the body can be made to pass from it to states of dissipated energy by reversible processes". In his 1876 magnum opus On the Equilibrium of Heterogeneous Substances, a graphical analysis of multi-phase chemical systems, he engaged his thoughts on chemical free energy in full.

Definitions

Willard Gibbs’ 1873 available energy (free energy) graph, which shows a plane perpendicular to the axis of v (volume) and passing through point A, which represents the initial state of the body. MN is the section of the surface of dissipated energy. Qε and Qη are sections of the planes η = 0 and ε = 0, and therefore parallel to the axes of ε ( internal energy) and η (entropy) respectively. AD and AE are the energy and entropy of the body in its initial state, AB and AC its available energy (Gibbs free energy) and its capacity for entropy (the amount by which the entropy of the body can be increased without changing the energy of the body or increasing its volume) respectively.

The Gibbs free energy is defined as:

$G = U+pV-TS \,$

which is the same as:

$G = H-TS \,$

where:

U is the internal energy ( SI unit: joule)
p is pressure (SI unit: pascal)
V is volume (SI unit: m³)
T is the temperature (SI unit: kelvin)
S is the entropy (SI unit: joule per kelvin)
H is the enthalpy (SI unit: joule)

The expression for the infinitesimal reversible change in the Gibbs free energy, for an open system, subjected to the operation of external forces X_i, which cause the external parameters of the system a_i to change by an amount da_i, is given by:

$\mathrm{d}G =V\mathrm{d}p-S\mathrm{d}T+\sum_{i=1}^k \mu_i \,\mathrm{d}N_i + \sum_{i=1}^n X_i \,\mathrm{d}a_i + \ldots \,$

$T d S = d q = d U + p d V,$ where:

$μ i$ is the chemical potential of the i-th chemical component. (SI unit: joules per particle or joules per mol)
$N i$ is the number of particles (or number of moles) composing the i-th chemical component.

This is one form of Gibbs fundamental equation. In the infinitesimal expression, the term involving the chemical potential accounts for changes in Gibbs free energy resulting from an influx or outflux of particles. In other words, it holds for an open system. For a closed system, this term may be dropped.

Any number of extra terms may be added, depending on the particular system being considered. Aside from mechanical work, a system may in addition perform numerous other types of work. For example, in the infinitesimal expression, the contractile work energy associated with a thermodynamic system that is a contractile fibre which shortens by an amount -dl under a force f would result in a term fdl being added. If a quantity of charge -de is acquired by a system at an electrical potential Ψ, the electrical work associated with this is -Ψde, which would be included in the infinitesimal expression. Other work terms are added on per system requirements.

Each quantity in the equations above can be divided by the amount of substance, measured in moles, to form molar Gibbs free energy. The Gibbs free energy is one of the most important thermodynamic functions for the characterization of a system. It is a factor in determining outcomes such as the voltage of an electrochemical cell, and the equilibrium constant for a reversible reaction. In isothermal, isobaric systems, Gibbs free energy can be thought of as a "dynamic" quantity, in that it is a representative measure of the competing effects of the enthalpic and entropic driving forces involved in a thermodynamic process.

The temperature dependence of the Gibbs energy for an ideal gas is given by the Gibbs-Helmholtz equation and its pressure dependence is given by:

$\frac{G}{N} = \frac{G}{N}^\circ + kT\ln \frac{p}{{p^\circ }}$

if the volume is known rather than pressure then it becomes:

$\frac{G}{N} = \frac{G}{N}^\circ + kT\ln \frac{V^\circ}{{V }}$

or more conveniently as its chemical potential:

$\frac{G}{N} = \mu = \mu^\circ + RT\ln \frac{p}{{p^\circ }}$

In non-ideal systems, fugacity comes into play.

Derivation

The Gibbs free energy total differential in terms of its natural variables may be derived via Legendre transforms of the internal energy. For a system undergoing an internally reversible process that is allowed to exchange matter, heat and work with its surroundings, the differential of the internal energy is given from the first law of thermodynamics as

$\mathrm{d}U = T\mathrm{d}S - p \,\mathrm{d}V + \sum_i \mu_i \,\mathrm{d} N_i\,$ .

Because $S$ , $V$ , and ${N i}$ are extensive variables, Euler's homogeneous function theorem allows easy integration of $d U$ :

$U = T S - p V + \sum_i \mu_i N_i\,$ .

The definition of $G$ from above is

$G = U + p V - T S\,$ .

Taking the total differential, we have

$\mathrm{d} G = \mathrm{d}U + p\,\mathrm{d}V + V\mathrm{d}p - T\mathrm{d}S - S\mathrm{d}T\,$ .

Replacing $d U$ with the result from the first law gives

$\mathrm{d} G = T\mathrm{d}S - p\,\mathrm{d}V + \sum_i \mu_i \,\mathrm{d} N_i + p \,\mathrm{d}V + V\mathrm{d}p - T\mathrm{d}S - S\mathrm{d}T\,$

$\mathrm{d} G = V\mathrm{d}p - S\mathrm{d}T + \sum_i \mu_i \,\mathrm{d} N_i \,$ .

The natural variables of $G$ are then $p$ , $T$ , and $\left \{ N_i \right \}$ . Because some of the natural variables are intensive, $d G$ may not be integrated using Euler integrals as is the case with internal energy. However, simply substituting the result for $U$ into the definition of $G$ gives a standard expression for G:

$G = T S - p V + \sum_i \mu_i N_i + p V - T S\,$

$G = \sum_i \mu_i N_i\,$ .

Overview

In a simple manner, with respect to STP reacting systems, a general rule of thumb is:

“

Every system seeks to achieve a minimum of free energy.

”

Hence, out of this general natural tendency, a quantitative measure as to how near or far a potential reaction is from this minimum is when the calculated energetics of the process indicate that the change in Gibbs free energy ΔG is negative. Essentially, this means that such a reaction will be favored and will release energy. The energy released equals the maximum amount of work that can be performed as a result of the chemical reaction. Conversely, if conditions indicated a positive ΔG, then energy--in the form of work--would have to be added to the reacting system to make the reaction go.

History

The quantity called "free energy" is essentially a more advanced and accurate replacement for the outdated term “ affinity”, which was used by chemists in previous years to describe the “force” that caused chemical reactions. The term affinity, as used in chemical relation, dates back to at least the time of Albertus Magnus in 1250.

From the 1998 textbook Modern Thermodynamics by Nobel Laureate and chemical engineering professor Ilya Prigogine we find: "As motion was explained by the Newtonian concept of force, chemists wanted a similar concept of ‘driving force’ for chemical change? Why do chemical reactions occur, and why do they stop at certain points? Chemists called the ‘force’ that caused chemical reactions affinity, but it lacked a clear definition."

During the entire 18th century, the dominant view in regards to heat and light was that put forward by Isaac Newton, called the “Newtonian hypothesis”, which stated that light and heat are forms of matter attracted or repelled by other forms of matter, with forces analogous to gravitation or to chemical affinity.

In the 19th century, the French chemist Marcellin Berthelot and the Danish chemist Julius Thomsen had attempted to quantify affinity using heats of reaction. In 1875, after quantifying the heats of reaction for a large number of compounds, Berthelot proposed the “ principle of maximum work” in which all chemical changes occurring without intervention of outside energy tend toward the production of bodies or of a system of bodies which liberate heat.

In addition to this, in 1780 Antoine Lavoisier and Pierre-Simon Laplace laid the foundations of thermochemistry by showing that the heat given out in a reaction is equal to the heat absorbed in the reverse reaction. They also investigated the specific heat and latent heat of a number of substances, and amounts of heat given out in combustion. Similarly, in 1840 Swiss chemist Germain Hess formulated the principle that the evolution of heat in a reaction is the same whether the process is accomplished in one-step or in a number of stages. This is known as Hess' law. With the advent of the mechanical theory of heat in the early 19th century, Hess’s law came to be viewed as a consequence of the law of conservation of energy.

Based on these and other ideas, Berthelot and Thomsen, as well as others, considered the heat given out in the formation of a compound as a measure of the affinity, or the work done by the chemical forces. This view, however, was not entirely correct. In 1847, the English physicist James Joule showed that he could raise the temperature of water by turning a paddle wheel in it, thus showing that heat and mechanical work were equivalent or proportional to each other, i.e. approximately, $dW \propto dQ$ . This statement came to be known as the mechanical equivalent of heat and was a precursory form of the first law of thermodynamics.

By 1865 the German physicist Rudolf Clausius had shown that this equivalence principle needed amendment. That is, one can use the heat derived from a combustion reaction in a coal furnace to boil water, and use this heat to vaporize steam, and then use the enhanced high pressure energy of the vaporized steam to push a piston. Thus, we might naively reason that one can entirely convert the initial combustion heat of the chemical reaction into the work of pushing the piston. Clausius showed, however, that we need to take into account the work that the molecules of the working body, i.e. the water molecules in the cylinder, do on each other as they pass or transform from one step of or state of the engine cycle to the next, e.g. from (P1,V1) to (P2,V2). Clausius originally called this the “transformation content” of the body, and then later changed the name to entropy. Thus, the heat used to transform the working body of molecules from one state to the next cannot be used to do external work, e.g. to push the piston. Clausius defined this transformation heat as dQ = TdS.

In 1873, Willard Gibbs published A Method of Geometrical Representation of the Thermodynamic Properties of Substances by Means of Surfaces in which he introduced the preliminary outline of the principles of his new equation able to predict or estimate the tendencies of various natural processes to ensue when bodies or systems are brought into contact. By studying the interactions of homogeneous substances in contact, i.e. bodies, being in composition part solid, part liquid, and part vapor, and by using a three-dimensional volume-entropy- internal energy graph, Gibbs was able to determine three states of equilibrium, i.e. "necessarily stable", "neutral", and "unstable", and whether or not changes will ensue. In 1876, Gibbs built on this framework by introducing the concept of chemical potential so to take into account chemical reactions and states of bodies which are chemically different from each other. In his own words, to summarize his results in 1873, Gibbs states:

In this description, as used by Gibbs, ε refers to the internal energy of the body, η refers to the entropy of the body, and ν is the volume of the body.

Hence, in 1882, after the introduction of these arguments by Clausius and Gibbs, the German scientist Hermann von Helmholtz stated, in opposition to Berthelot and Thomas’ hypothesis that chemical affinity is a measure of the heat of reaction of chemical reaction as based on the principle of maximal work, that affinity is not the heat given out in the formation of a compound but rather it is the largest quantity of work which can be gained when the reaction is carried out in a reversible manner, e.g. electrical work in a reversible cell. The maximum work is thus regarded as the diminution of the free, or available, energy of the system (Gibbs free energy G at T = constant, P = constant or Helmholtz free energy F at T = constant, V = constant), whilst the heat given out is usually a measure of the diminution of the total energy of the system ( Internal energy). Thus, G or F is the amount of energy “free” for work under the given conditions.

Up until this point, the general view had been such that: “all chemical reactions drive the system to a state of equilibrium in which the affinities of the reactions vanish”. Over the next 60 years, the term affinity came to be replaced with the term free energy. According to chemistry historian Henry Leicester, the influential 1923 textbook Thermodynamics and the Free Energy of Chemical Reactions by Gilbert N. Lewis and Merle Randall led to the replacement of the term “affinity” by the term “free energy” in much of the English-speaking world.

What does the term ‘free’ mean?

In the 18th and 19th centuries, the theory of heat, i.e. that heat is a form of energy having relation to vibratory motion, was beginning to supplant both the caloric theory, i.e. that heat is a fluid, and the four element theory in which heat was the lightest of the four elements. Many textbooks and teaching articles during these centuries presented these theories side by side. Similarly, during these years, heat was beginning to be distinguished into different classification categories, such as “free heat”, “combined heat”, “radiant heat”, specific heat, heat capacity, “absolute heat”, “latent caloric”, “free” or “perceptible” caloric (calorique sensible), among others.

In 1780, for example, Laplace and Lavoisier stated: “In general, one can change the first hypothesis into the second by changing the words ‘free heat, combined heat, and heat released’ into ‘ vis viva, loss of vis viva, and increase of vis viva.’” In this manner, the total mass of caloric in a body, called absolute heat, was regarded as a mixture of two components; the free or perceptible caloric could affect a thermometer while the other component, the latent caloric, could not. The use of the words “latent heat” implied a similarity to latent heat in the more usual sense; it was regarded as chemically bound to the molecules of the body. In the adiabatic compression of a gas the absolute heat remained constant by the observed rise of temperature, indicating that some latent caloric had become “free” or perceptible.

During the early 19th century, the concept of perceptible or free caloric began to be referred to as “free heat” or heat set free. In 1824, for example, the French physicist Sadi Carnot, in his famous “Reflections on the Motive Power of Fire”, speaks of quantities of heat ‘absorbed or set free’ in different transformations. In 1882, the German physicist and physiologist Hermann von Helmholtz coined the phrase ‘free energy’ for the expression E – TS, in which the change in F (or G) determines the amount of energy ‘free’ for work under the given conditions.

Thus, in traditional use, the term “free” was attached to Gibbs free energy, i.e. for systems at constant pressure and temperature, or to Helmholtz free energy, i.e. for systems at constant volume and temperature, to mean ‘available in the form of useful work.’ With reference to the Gibbs free energy, we add the qualification that it is the energy free for non-volume work.

An increasing number of books and journal articles do not include the attachment “free”, referring to G as simply Gibbs energy (and likewise for the Helmholtz energy). This is the result of a 1988 IUPAC meeting to set unified terminologies for the international scientific community, in which the adjective ‘free’ was supposedly banished. This standard, however, has not yet been universally adopted, and many published articles and books still include the descriptive ‘free’.

Free energy of reactions

To derive the Gibbs free energy equation for an isolated system, let S_tot be the total entropy of the isolated system, that is, a system which cannot exchange heat or mass with its surroundings. According to the second law of thermodynamics:

$\Delta S_{tot} \ge 0 \,$

and if $\Delta S_{tot} = 0 \,$ then the process is reversible. The heat transfer $Δ Q$ vanishes for an adiabatic system. Any adiabatic process that is also reversible is called an isentropic $\left( {\Delta Q\over T} = \Delta S = 0 \right) \,$ process.

Now consider diabatic systems, having internal entropy S_int. Such a system is thermally connected to its surroundings, which have entropy S_ext. The entropy form of the second law does not apply directly to the diabatic system, it only applies to the closed system formed by both the system and its surroundings. Therefore a process is possible if

$\Delta S_{int} + \Delta S_{ext} \ge 0 \,$ .

We will try to express the left side of this equation entirely in terms of state functions. ΔS_ext is defined as:

$\Delta S_{ext} = - {\Delta Q\over T} \,$

Temperature T is the same for two systems in thermal equilibrium. By the zeroth law of thermodynamics, if a system is in thermal equilibrium with a second and a third system, the latter two are in equilibrium as well. Also, $Δ Q$ is heat transferred to the system, so $- Δ Q$ is heat transferred to the surroundings, and −ΔQ/T is entropy gained by the surroundings. We now have:

$\Delta S_{int} - {\Delta Q\over T} \ge 0 \,$

Multiply both sides by T:

$T \Delta S_{int} - \Delta Q\ge 0 \,$

ΔQ is heat transferred to the system; if the process is now assumed to be isobaric, then ΔQ_p = ΔH:

$T \Delta S_{int} - \Delta H \ge 0\,$

ΔH is the enthalpy change of reaction (for a chemical reaction at constant pressure and temperature). Then

$\Delta H - T \Delta S_{int} \le 0 \,$

for a possible process. Let the change ΔG in Gibbs free energy be defined as

$\Delta G = \Delta H - T \Delta S_{int} \,$ (eq.1)

Notice that it is not defined in terms of any external state functions, such as ΔS_ext or ΔS_tot. Then the second law becomes, which also tells us about the spontaneity of the reaction:

$\Delta G < 0 \,$ favored reaction (Spontaneous)

$\Delta G = 0 \,$ Neither the forward nor the reverse reaction prevails (Equilibrium)

$\Delta G > 0 \,$ disfavored reaction (Nonspontaneous)

Gibbs free energy G itself is defined as

$G = H - T S_{int} \,$ (eq.2)

but notice that to obtain equation (2) from equation (1) we must assume that T is constant. Thus, Gibbs free energy is most useful for thermochemical processes at constant temperature and pressure: both isothermal and isobaric. Such processes don't move on a P-T diagram, such as phase change of a pure substance, which takes place at the saturation pressure and temperature. Chemical reactions, however, do undergo changes in chemical potential, which is a state function. Thus, thermodynamic processes are not confined to the two dimensional P-V diagram. There is a third dimension for n, the quantity of gas. Naturally for the study of explosive chemicals, the processes are not necessarily isothermal and isobaric. For these studies, Helmholtz free energy is used.

If a closed system (ΔQ = 0) is at constant pressure (ΔQ = ΔH), then

$\Delta H = 0 \,$

Therefore the Gibbs free energy of a closed system is:

$\Delta G = -T \Delta S \,$

and if $\Delta G \le 0 \,$ then this implies that $\Delta S \ge 0 \,$ , back to where we started the derivation of ΔG.

Useful identities

$\Delta G = \Delta H - T \Delta S \,$ for constant temperature

$\Delta G^\circ = -R T \ln K \,$

$\Delta G = \Delta G^\circ + R T \ln Q \,$

$\Delta G = -nF \Delta E \,$

and rearranging gives

$nF\Delta E^\circ = RT \ln K \,$

$nF\Delta E = nF\Delta E^\circ - R T \ln Q \, \,$

$\Delta E = \Delta E^\circ - \frac{R T}{n F} \ln Q \, \,$

which relates the electrical potential of a reaction to the equilibrium coefficient for that reaction.

where

ΔG = change in Gibbs free energy, ΔH = change in enthalpy, T = absolute temperature, ΔS = change in entropy, R = gas constant, ln = natural logarithm, K = equilibrium constant, Q = reaction quotient, n = number of electrons per mole product, F = Faraday constant ( coulombs per mole), and ΔE = electrical potential of the reaction. Moreover, we also have:

$K_{eq}=e^{- \frac{\Delta G^\circ}{RT}}$

$\Delta G^\circ = -RT(\ln K_{eq}) = -2.303RT(\log K_{eq})$

which relates the equilibrium constant with Gibbs free energy.

Standard change of formation

The standard Gibbs free energy of formation of a compound is the change of Gibbs free energy that accompanies the formation of 1 mole of that substance from its component elements, at their standard states (the most stable form of the element at 25 degrees Celsius and 100 kilopascals). Its symbol is ΔG_f^O.

All elements in their standard states (oxygen gas, graphite, etc.) have 0 standard Gibbs free energy change of formation, as there is no change involved.

ΔG = ΔG˚ + RT ln Q

At equilibrium, ΔG=0 and Q = K so the equation becomes ΔG˚= −RT ln K

Table of Selected Substances

Substance	State	ΔG˚ ( cal/ mol)
NH₃	g	-3.976
H₂O	lq	-56.69
H₂O	g	-54.64
CO₂	g	-94.26
CO	g	-32.81
CH₄	g	-12.14
C₂H₆	g	-7.86
C₃H₈	g	-5.614
C₈H₁₈	g	4.14
C₁₀H₂₂	g	8.23

Retrieved from " http://en.wikipedia.org/wiki/Gibbs_free_energy"